It is a design trend to separate the wet and dry in the toilet, because the design of the wet and dry separation can not only make the toilet not too wet, but also make it better antiskid, and is conducive to the protection of electrical equipment. In addition, the biggest advantage is that it is convenient for two or more people to use at the same time. So, can the toilet be separated from wet and dry?
1： Advantages of dry and wet separation:
1. Easy to clean
Due to the high humidity in the toilet, the furniture in the toilet will be corroded over time. It is not only necessary to replace the new cabinets, but also to breed a lot of bacteria. If the shower is close to the toilet, the toilet and toilet paper are easy to get wet and inconvenient to use. If there is water on the ground, it is easy to slide, step on the dirt and separate dry from wet, these problems can be solved well.
2. Easy to use
The separation of wet and dry in the toilet can improve the utilization rate of the space, and there will be no conflict between going to the bathroom and washing. Especially for the people with more than one family, there is no need to rob the toilet in the morning. And if the toilet does not do dry and wet separation, the whole bathroom is foggy after the bath, the next person will be very uncomfortable, if the dry and wet separation, it can ensure that the toilet and wash table are dry.
3. Beautiful and generous
Usually, the washing table is placed outside the bathroom, and there are partitions in the bathroom, so we can also make some good-looking shapes when decorating. Washing table can also be mixed with decoration style. Many owners do this, which will be very beautiful and convenient.
2： Disadvantages of dry wet separation
1. Great limitation
The biggest problem of dry and wet separation is that not all types of houses are suitable, and it is only suitable for the new houses or the ones with large area. Even if some houses may be changed, it's OK, but this project will be more troublesome, and the cost will be higher, so it will have an impact on people with insufficient budget.
2. Large area
The separation of dry and wet requires a relatively large area of the toilet, otherwise the space will be cramped and crowded. Usually, separating the washing table from the toilet will require an additional wall or a door. If the space is small, it is not suitable.
3： Design case of dry wet separation
1. Horizontal parallel design of toilet and washstand
The washstand, toilet and shower are arranged in order to look neat and fresh. Because the space used by the toilet is small, it is more concealed in the middle visually. The biggest advantage of this design is that the shower can be designed near the window, which is more conducive to ventilation, so as to help the moisture volatilization and keep the toilet dry.
2. The front of toilet and washstand is relatively designed
If you want to make a large washstand and the width of the washroom is enough, you can use the design method of comparing the toilet with the washstand. The shower is also designed on the inside, so that the dry and wet separation can still be done. The only thing we should pay attention to is that the width of the toilet should be enough, otherwise it will lead to the unsmooth moving line.
3. Corner design of toilet and washstand
A necessary condition for such a design is to design the shower in a corner position. This kind of design method is becoming more and more popular, because this kind of design will make the moving line more fluent, and put the shower room at the corner position, it is more convenient for people to turn around when bathing, the only disadvantage is that they can't satisfy the people who want to be a bathtub.
4. Vertical parallel design of toilet and washstand
This kind of design is relatively few, more suitable for the long and narrow toilet. But the biggest advantage of it is that it can design a long table, and the disadvantage is that it will be crowded visually. After all, you can see the washstand and toilet at a glance, and if you want to do squatting toilet, it is not so appropriate.
5. Design the washstand outside the toilet door
If the bathroom is too small, try to move the washstand out. Of course, the premise is that your water pipeline is suitable, and there is just enough space outside the bathroom. In this way, the design can greatly solve the problem of insufficient space in the toilet, and can safely carry out dry and wet separation. But at the same time, the washstand placed in the corridor should also be reasonably designed, with a non slip pad or something under it, otherwise it is not good to splash the corridor frequently.
When decorate, if toilet size is suitable and decorate budget is enough, do dry wet separation is very necessary. If the toilet is relatively small, there is no need to do dry and wet separation, but it can be considered to install partition or shower curtain, which can prevent water splashing everywhere, and the shower curtain can be pulled up when not in use, which is also convenient for replacement.