How can we separate the wet and dry in the bathroom? Simple, do commonly used method is, wash basin outside, glass partition, partition wall with space sense and cheap and easy to use shower curtain. Today, I will introduce their advantages and disadvantages and how to operate them.
Wash table moved out
The most thorough way to separate the dry and wet is to move the hand washing table outside the door directly, and use part of the outer space to make the shower area in the bathroom more spacious. Moving the hand washing table out of the bathroom will not change the moving line and the long way, and will not affect our living habits. Moreover, the external washing table can also let the family wash sooner or later, which will be more convenient and will not interfere with each other.
Installation of a shower curtain can also effectively alleviate the situation of water vapor. Shower curtain may be partition effect is not the best, but easy to install, simple operation, and save space. Do a water bar and hang a shower curtain, whether it is the arc of the corner, or directly pull up a straight line, are very convenient, you can often change the style of the shower curtain, change to a different style.
Toilet space is large enough, partition wall can also be considered. It can protect privacy, good waterproof ability, and can be stored on the wall. But it is not suitable for small space toilet.
Glass partition, in the visual space will appear bright and transparent, and the glass water resistance is good, dry and wet partition effect will be better.
Straight glass partition
Suitable for long and narrow bathroom space, shower area just occupies a wall or in the corner. The first is that the bigger the glass is, the more unsafe it is. Second, if it is a dark bathroom, the partition is connected to the roof, which leads to poor ventilation, and there is a hidden danger in bathing.
Square glass partition
More suitable for square, small area toilet, can save more places. At the same time, the opening of the door can also be flexible, and the cost can be slightly lower.
Curved glass partition
Arc glass partition and square is very similar, also suitable for small bathroom, and there is no prominent corner, if there are elderly and children at home, it is relatively safer. But the glass needs to do heat bending treatment, the shape of sliding door is complex, so the cost is much higher than the general shape.
Diamond glass partition
It is a form between right angle and arc. Considering the high cost of arc-shaped glass partition, diamond shower room made of three pieces of glass is a compromise choice. The utility model has the same space saving effect, which is generally installed at the angle position of sanitary ware. It is recommended to adopt the form of swing door, which can not only save space, but also ensure that the shower area space is larger.
Matters needing attention in toilet wet and dry separation
1. For bathroom partition decoration, floor tiles and wall tiles shall be paved first, and then toilet partition shall be made according to actual size (note that there may be errors between the upper and lower walls, and the glass door can be installed and used according to the actual size)
2. Bathroom partition decoration, before laying floor tiles to install sewer pipes, installation of floor drain (otherwise, where does the shower water flow)
3. If there is no door frame, the threshold stone should be specially installed (1.5-2 cm higher than the ground), otherwise the shower water will not be able to achieve the purpose of dry and wet partition.