欢迎来到山东铭德昊智能科技有限公司网站为您提供:干湿分离蹲便器

  • 干湿分离蹲便器厂家
  • 坐便器干湿分离技术
  • 农村改厕干湿分离蹲便器
您现在所在的位置 :首页 - 新闻资讯 > 新闻资讯 >

新闻资讯

xnews

全国统一咨询热线

0531-88259217

山东铭德昊智能科技有限公司

联系人:吕经理

联系电话:18660797818

公司地址:济南市高新区开拓路2350号

新闻资讯

干湿分离蹲便器要怎么设计和施工?

来源:http://www.mingdehao.com 日期:2020-04-06 发布人:admin
  基本上家庭装修卫生间多使用一些坐便器,不过还有家庭因为个人生活习惯的问题可以选择安装蹲便器。那么卫生间假如要安装干湿分离蹲便器,应该怎样设计和施工呢?
  Basically family decorates toilet to use a few sit toilet more, but still have a family because of the problem of individual life habit can choose to install squat toilet. So if toilet wants to install dry wet separation squatting pan, how should design and construction?
  首先,应根据选购的蹲便器排水口位置,留出墙面的适当位置预留好下水道,而此时,应确定从下水道距离地面的入口向下的距离。
  First of all, according to the optional position of the squatting toilet drain, the appropriate position of the wall should be reserved for the sewer, and at this time, the distance from the sewer to the ground entrance should be determined downward.
  同时也要在地上储备好安装坐便器的坑,坑的深度必须大于蹲的高度实现,所以很多人说很可能无法理解,所以联盟图片应该很清楚!
  At the same time, the pit for installing the toilet must be reserved on the ground. The depth of the pit must be greater than the squatting height, so many people say that it may not be understood, so the League picture should be very clear!
干湿分离蹲便器
  后决定要尺寸,可以连接胶塞插入卫生间的洞进入水里卡紧,更好打一层玻璃胶或砂浆外边缘,再用输入水导管插入胶来插入孔内,这样封性会更好,避免今后使用过程中泄漏。
  After that, it is decided to use the size. It is better to connect the rubber plug into the hole in the toilet and clamp it in the water. It is better to lay a layer of glass glue or mortar on the outer edge, and then insert the rubber into the hole with the input water conduit. In this way, the sealing performance will be better and leakage in the future use process will be avoided.
  还要注重出口的缝合后,蹲下器出口的边缘打上玻璃胶,然后把水管的进口插入水管的入口处堵上,蹲下器竖立水平好和填充物。
  Also pay attention to the suture of the exit, the edge of the exit of the squatter shall be coated with glass glue, and then the inlet of the water pipe shall be inserted into the inlet of the water pipe to block up, and the squatter shall be erected at a good level and filled with materials.
  所有这些工作完成后,打开进水系统,检查所有接头,看是否有任何泄漏,如果有,反复扫描泄漏,直到发现并加强。
  After all these works are completed, open the water inlet system, check all joints to see if there is any leakage, and if so, scan the leakage repeatedly until it is found and strengthened.
  检查好不渗漏的现象后,可采用填充物蹲便器四周填实,在此注重,同时要将陶瓷与水泥砂浆的接触面,填上1cm左右的弹性材料。再用水泥砂浆将蹲便器固定在平面位置上,确定牢固后再开始铺设卫生间的地砖。
  After checking whether there is no leakage, the surrounding of the filling squatting pan can be used for filling. In this regard, the contact surface between the ceramic and the cement mortar shall be filled with an elastic material of about 1cm. Finally, fix the squatting pan on the plane position with cement mortar, and lay the floor tiles of the toilet after it is firm.
  虽然现在用蹲式器的家庭不多,但还是有些人喜欢用,所以希望今天分享的知识对大家都有帮助。再提醒大家,无论是蹲便器还是坐便器都要选择正规品牌,欢迎点击官方网站进行咨询:http://www.mingdehao.com
  Although there are not many families using squatting apparatus now, some people like to use it, so I hope the knowledge shared today will help everyone. Finally, I would like to remind you that both squatting toilets and sitting toilets should choose regular brands. Please click the official website for consultation: http://www.mingdehao.com
  • 上一条:几个挑选蹲便器的小技巧!
  • 下一条:蹲便器设计在淋浴房里有哪些优点?